ADVANCED POWER SOURCES LIMITED
Menu
Home > Products > Welding Machines> Heavy Duty Welding Machines
The word ‘duty’/’duty cycle’ is one of the most used term while describing a welding machine. It is one of the most important specification after Maximum Current Output that may guide users to purchase a welding machine.
Duty Cycle of a welding machine is the percentage of time at which the machine can be operated at its maximum rated power. In simple words it’s the division of operational time at maximum power rating and the total time(includes idle time). Idle time is typically required to cool down the machine to ambient/or slightly higher temperature than ambient to avoid failure/break down of the machine.
Operational Time (@Max Power Rating) X 100
Operational Time (@Max Power Rating) + Idle Time
Maximum Current Rating X Load Voltage
The duty cycle of an inverter welder plays a crucial role in determining its efficiency and performance. Here’s how it impacts welding operations:
Optimal Usage: Knowing the duty cycle of your welder allows you to plan your welding tasks effectively. By adhering to the recommended duty cycle, you can maximize productivity without risking overheating or damage to the equipment.
Cooling and Rest Periods: During the rest periods, the welder’s internal components have the opportunity to cool down, preventing overheating and ensuring longevity. It’s essential to allow sufficient rest periods to maintain consistent welding performance and prevent premature wear and tear.
Workload Management: Understanding the duty cycle allows welders to manage their workload efficiently. By factoring in rest periods, they can schedule tasks in a way that optimizes both productivity and equipment longevity.
Several factors can influence the duty cycle of an inverter welder:
Ambient temperatures play a major role in duty cycle determination. Duty Cycle is always higher where ambient temperatures are less, since heat dissipation from the welding machine will be more effective. Higher the ambient temperatures, lesser is the duty cycle.
Duty Cycle ∞ 1
Ambient Temperature
Operating at higher currents or voltages may decrease the duty cycle as it puts greater strain on the welder’s components.
Duty Cycle ∞ 1
Voltage X Current
Manufacturers provide duty cycle ratings based on standardized testing conditions. It’s essential to refer to these ratings for accurate assessment.
Heavy Duty Welding Machines Manufacturers generally specify duty cycle as follows:
400A, 30V @ 50% Duty
315A, 28V @ 60% Duty
290A, 28V @ 100% Duty
400A, 30V @ 60% Duty
335A, 28V @ 75% Duty
310A, 28V @ 100% Duty
Traditional we required huge and bulky power sources to achieve a good duty cycle since the loses in these sources were quite high, resulting in heating up of machine. But with the latest advancements in welding machine technology, the inverter based power sources are able to achieve desired power output and duty cycle with relatively smaller sized machines. The size of the machines will further decrease with the on-going techological advancements in the near future. The following advantages have been listed due to the above listed advancements in technology:
Unlike their transformer-based counterparts, heavy-duty inverter welding machines are compact and lightweight, making them highly portable. This portability enables welders to manoeuvre easily around large workpieces or job sites.
Inverter technology excels in power efficiency, consuming less energy compared to traditional welding machines. This efficiency translates into cost savings for businesses and reduces the environmental impact of welding operations.
Built to withstand rugged industrial environments, heavy-duty inverter welding machines are constructed using robust materials and feature solid-state components. This durability ensures reliable performance even in harsh conditions, contributing to enhanced productivity and reduced downtime.
Inverter welders with higher duty cycles offer the advantage of prolonged continuous operation. This is particularly beneficial for demanding welding tasks that require extended periods of welding at high currents.
APS welding is always ready to help you. For Sales Enquiries:Contact: +91 9601 444 111For booking service call:Contact: +91 9601 444 222
We design and manufacture all our products and thus we know the best about our products.
We are able to offer international technology and service at optimum prices.
Our team is regularly trained for updates in service techniques and also are constantly update on knowledge and skill.
We ensure you professionally managed sales and after sales support.
Office & Manufacturing Facility:
Survey No 172/1, Paikee 2, OLD GIDC Gundlav, Valsad, Valsad District, GUJARAT – 396035. INDIA.